Updated from 4.0 to 4.1 now it wont see my mapped network drives.
windows explorer sees the mapped network drive no issue.
in schematic/pcb etc, no mapped drive shows up. I can browse via \\machine\path\files\ just fine too.
it just wont show the mapped Z:\ drive on my Windows 10.
(I had no issue with this under 4.0)
mapped drive/network shares in 4.1
-
- Posts: 1
- Joined: 09 Nov 2014, 14:24
- Location: Lexington VA
- Contact:
Re: mapped drive/network shares in 4.1
Thank you for the report, we will investigate the issue.
DipTrace uses standard file open dialog from Windows. You can try to reset DipTrace settings in registry. Please find default.reg file in DipTrace folder and rut it. That will reset all DipTrace settings in Windows registry. I hope that will help.
DipTrace uses standard file open dialog from Windows. You can try to reset DipTrace settings in registry. Please find default.reg file in DipTrace folder and rut it. That will reset all DipTrace settings in Windows registry. I hope that will help.
Re: mapped drive/network shares in 4.1
I just found this post and tried this for update from 4.2 > 4.3 and it works. Thanks!