Via stitching / shielding

Post your feature requests here. Please use search function to ensure it is not here yet.
Post Reply
Message
Author
SoundMod
Posts: 77
Joined: 15 Feb 2016, 05:47

Via stitching / shielding

#1 Post by SoundMod » 20 Nov 2020, 14:12

Hi there,

I know that via stitching as been discuss in the past. But I'm wondering if you have this in your future feature list ?

I would also add that, if via stitching is planned consider to add "via shielding" functionnality along a selected net or a differential pair.
For via shielding, I would add the ability to set the distance between via manually or base on the option to use a calculated distance from 1/4, 1/10 or 1/20 of the desired frequency wavelenght.
The calculation would also take in consideration that the constant C is smaller when propagating through PCB.

This is my thought about this. But via stitching/shielding manually on a big design can be a bit tedious. I think that this process should be automated.

Cheers.

Alex
Technical Support
Posts: 3897
Joined: 13 Jun 2010, 23:43

Re: Via stitching / shielding

#2 Post by Alex » 23 Nov 2020, 20:38

Thank you for the suggestion. We will try to implement via stitching and shielding in future versions.

Post Reply