Schematic Capture verification problem
Schematic Capture verification problem
The Beta 3 schematic verification is erroneously generating an error for the MUNxxxx number series of NPN transistors. The emitter pins are defined as "Power" instead of "Passive" and it reports a pin mismatch when the emitter is connected to an output pin (as when using a DTR or CTS pin on a USB bridge IC). It is the only series that I have found with this--all others that I have checked (so far) seem to be OK.
Re: Schematic Capture verification problem
Strange, but emitter labelled as ground in datasheet.
You do not have the required permissions to view the files attached to this post.