An Unusual Situation From LM5122

For general questions regarding the software and for all questions that do not fit in any of the threads above.
Post Reply
Message
Author
KAKU
Posts: 5
Joined: 11 Aug 2021, 21:46
Location: Shenzhen, Guangdong
Contact:

An Unusual Situation From LM5122

#1 Post by KAKU » 08 Apr 2022, 15:53

Hello,
When there is no load, the PWM HO and LO outputs will appear PWM periodically and briefly, accompanied by a whistle of the inductor. At this time, the input voltage will also have a downward peak value, and the output voltage will be unstable.
When loaded, the input voltage is no longer a constant level, but a regular sawtooth wave, and only when the input voltage waveform is lower than a certain value, the HO\LO pin will generate PWM, otherwise, it will not generate PWM, at this time the inductance whistle, the output voltage is a sawtooth wave in the opposite direction to the input voltage.
Here is the datasheet link: https://www.utmel.com/productdetail/tex ... pb-7802861
Hope for helping!

Good listening!
Continued to searching something new in electronic:
https://www.utmel.com/components/ds3231 ... uit?id=389 :D

Post Reply