Thermals
-
- Posts: 1
- Joined: 07 Jul 2021, 18:53
Thermals
Hi All, There is something I'm missing re placing thermals. I place a pad (round, 2mm x 2mm, 0.4mm hole) on copper pour, then connect it. Then enter 'thermal settings' and check 'Custom Settings'. Set for '4 spoke 45' and width of 0.7. When I update the pour The pad is blocking the thermal. If I Right click and select 'Hide Pad Ring in Layer', the thermal is exposed. However if I do a pour update, the thermal disappears and I'm left with just a 'hole on the pour'. There must be some way to expose the thermal permanently.
Re: Thermals
Please check clearance in copper pour settings. It looks like the value is very small and the pour touches to pad without thermal.