Used MC34063A to make a charger for lithium iron phosphate battery

Post your circuits and ideas here
Post Reply
Message
Author
RachelAnne2020
Posts: 3
Joined: 16 Jul 2021, 03:42

Used MC34063A to make a charger for lithium iron phosphate battery

#1 Post by RachelAnne2020 » 24 Aug 2021, 03:54

For the sake of simplicity, I didn’t use a special cross-current circuit. I directly use Rsc to limit the maximum input current Ipk. My Rsc uses a 2W metal film resistor that is about 0.5 ohms. It is about 600mA charging current under 9V input. Too big, next time I have the opportunity to change it again and add a cross-current circuit.
Inductance actually uses 1mH, replace R1 with a 1K resistor + 1K precision adjustable, which can be used to carefully adjust the constant voltage output at 3.65 or 4.2V to adapt to different batteries.
Reference: https://www.utmel.com/components/mc3406 ... out?id=428
You do not have the required permissions to view the files attached to this post.

Post Reply