Author Message
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 21 Feb 2016, 17:06 
Offline

Joined: 21 Feb 2016, 16:41
Posts: 1
I would like to see a complete inventory of Vashay CRCW series resistors and Vashay VJ series capacitors. I ask because these parts seem to be of good quality at a reasonable price, and I can easily figure out significant part values just by looking at the part number.
It would be absolutely out standing if I knew these parts were in stock at mouser.com or digikey.com just because they are in your library, but that's something Mouser and Digikey need to decide. This second part is not your dog, but please consider the first.


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 25 Feb 2016, 13:10 
Offline

Joined: 25 Feb 2016, 12:14
Posts: 7
it would really help me in my project if you include (superflux) Piranha 5mm Led

I'm new (and new to computer desing software) and I lost a day trying to create it in patten and component editor... then I abort and used 5mm round led instead.


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 03 Aug 2016, 03:29 
Offline

Joined: 19 Feb 2016, 03:53
Posts: 6
Yeah thinking the same. Diptrace should have varieties of Heatsinks including 3D models.
Thank you in advance
เล่นคาสิโนออนไลน์ หนึ่งของประเทศไทย เปิดบัญชีฝากถอนไม่จำกัด แจกเงินโบนัสแรกเข้า ทดลองเล่นฟรี
บาคาร่าออนไลน์


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 23 Aug 2016, 12:13 
Offline

Joined: 27 Jan 2016, 11:34
Posts: 2
I'd like to see some place on the Diptrace website where we can upload our own custom created patterns for others to download. There is a forum thread, but that doesn't work so well for a larger community. Of course it would be a "use at your own risk" thing. It would save so much time being able to grab a part # from digikey, throw it into a search on the website and see if anyone else has posted a component / pattern for it.

For the number of components / patterns I create from drawings day to day, i'm sure I could save some people some time down the road instead of them just sitting on my hard drive.


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 24 Aug 2016, 06:41 
Offline

Joined: 10 Jan 2015, 02:00
Posts: 188
Location: Anaheim, CA 92806
This may possible for KiCAD degins

_________________
PCB Manufacturing


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 22 Nov 2016, 04:45 
Offline

Joined: 22 Nov 2016, 04:35
Posts: 1
Can you add function to higlight some nets in PCB Layout? It will be useful to see "hot" nets, like 220V. Sorry for my english :)


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 01 Feb 2017, 11:28 
Offline

Joined: 01 Feb 2017, 11:22
Posts: 1
Just getting Ultra Librarian to support you would be nice. Also just being able to automatically lengthen the pads on a smt devices so they can be more easily hand soldered would also be really helpful.


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 24 Aug 2017, 16:21 
Offline

Joined: 05 May 2017, 17:45
Posts: 5
I miss the FPGA's from Microsemi. I can't even find the footprints used for some of the smallest IGLOO chips.


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 29 Aug 2017, 17:52 
Offline
Expert

Joined: 14 Jun 2010, 16:46
Posts: 115
heitbrsp wrote:
Just getting Ultra Librarian to support you would be nice.

I just asked the people at Accelerated Designs (Ultra Librarian) about adding the ability to export models in Diptrace format and here's the response I got:
Quote:
I need to see if I can find a someone at Diptrace to talk to. We are always looking at new exports
....so it sounds as if they are receptive. Who at Diptrace should they contact?

-Rick


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 30 Aug 2017, 13:49 
Offline

Joined: 18 Dec 2015, 15:35
Posts: 162
rick.curl wrote:
heitbrsp wrote:
Just getting Ultra Librarian to support you would be nice.

I just asked the people at Accelerated Designs (Ultra Librarian) about adding the ability to export models in Diptrace format and here's the response I got:
Quote:
I need to see if I can find a someone at Diptrace to talk to. We are always looking at new exports
....so it sounds as if they are receptive. Who at Diptrace should they contact?

-Rick

It is nice being able to use Digikeys Ultra Librarian for 3D models, to actually get a foot print and the component? Wow what a thought, that would increase users interest in using DipTrace I would think.

-- 30 Aug 2017, 14:08 --

ProudlyCanuck wrote:
I'd like to see some place on the Diptrace website where we can upload our own custom created patterns for others to download. There is a forum thread, but that doesn't work so well for a larger community. Of course it would be a "use at your own risk" thing. It would save so much time being able to grab a part # from digikey, throw it into a search on the website and see if anyone else has posted a component / pattern for it. For the number of components / patterns I create from drawings day to day, i'm sure I could save some people some time down the road instead of them just sitting on my hard drive.


I've been experimenting with shared cloud folders like Onedrive (5GB), Google Drive(15GB), WebDAV(Unlimited ISP Plan), they all appear to work well and I discovered that if you purchase a Segate Backup drive (4TB) they give you 200GB for a year on Onedrive! The first question is can it be controlled? The second is search; currently we can search libraries by part name, that needs to be expanded to include a Mouser/Digikey like format 'Keyword' so we could enter in 'diode' and see all diodes or 'diode smt tvt' to see all SMT TVT type diodes in a part library. Going to Mouser/DigiKey, searching then using the part number found for a component/pattern search results in a lot of disappointments and wasted time. With that criteria it changes from a flat file system to a searchable database system... That application isn't trivial considering each part vendor has a different API and restrictions like 50 returned items a search and 1000 searches a day...
Update: The Ultra Librarian at Digikey produces Eagle pattern and components so I tried them: Eagle 6.1 that couldn't be opened with 7.n and 8.n Eagle BUT there was a *.src file that DipTrace could open as an Eagle *.SRC file, I found a library with three components with patterns, it saved as an *.eli or component with embedded patterns?

At Digikey you get 15 parts a month before you can't download anymore.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 90 posts ]  Go to page Previous  1 ... 5, 6, 7, 8, 9

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group