Author Message
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 04 Apr 2013, 07:40 
Offline

Joined: 21 Sep 2012, 07:50
Posts: 30
1) All MSP430 processors from Texas Instruments.
2) Coilcraft parts
3) Linear Tech switchers
3) Everything at DigiKey (maybe DigiKey could help with this)
4) 3D models of all existing parts


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 15 Apr 2013, 16:09 
Offline

Joined: 15 Jun 2010, 11:47
Posts: 21
mgriebling wrote:
4) 3D models of all existing parts

Or 3d model editor like pattern editor to edit existing 3D models to create new one. For example all diodes has similar patterns. So i can create new 3d model via change height or width properties existing model.


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 18 Apr 2013, 15:29 
Offline

Joined: 16 Jul 2011, 19:54
Posts: 70
I would like to see every part used on an Arduino Uno in the library -- no exceptions. (the Arduino is an Open-source hardware board, and they provide schematics, etc, so you can build your own) This would be a nice move from a marketing standpoint; there are a lot of webpages devoted to the Arduino, and a lot of them have eagle files because at one time eagle was the only free alternative. Imagine being able to post a message that says "The 300-pin Freeware version of DipTrace handles an Arduino board just fine, and every part that is on the Arduino is already in the DipTrace library".

The Arduino Uno schematic is at:
[ http://arduino.cc/en/uploads/Main/Ardui ... ematic.pdf ]
[ http://arduino.cc/en/Main/arduinoBoardUno ]

As a possible follow-up, here are some other open-source hardware projects:

Raspberry Pi:
[ http://www.raspberrypi.org/archives/2233 ]
[ http://www.designspark.com/knowledge-it ... revision-2 ]

Freeduino:
[ http://www.freeduino.org/freeduino_open_designs.html ]

RepRap:
[ www[dot]reprap[dot]org/wiki/Gen7_Board-AVR_1.5 ]
[ en[dot]wikipedia[dot]org/wiki/RepRap_Project ]

Beagleboard:
[ beagleboard[dot]org/hardware/design ]

Odroid:
[ com[dot]odroid[dot]com/sigong/blog/blog_list.php?bid=129 ]


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 30 Jun 2013, 13:39 
Offline

Joined: 11 Nov 2011, 19:52
Posts: 25
Not really a library request but.......
It would be great if part manufacturers would provide component and pattern libraries as a product support function rather than just an engineering drawing as part of a datasheet.
This is the 21st Century after all.

If most PCB design applications could read the manufaturers component and pattern data and then be able to import directly into a library we would all save a lot of time and effort and avoid stupid mistakes.

My twopence worth


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 06 Sep 2013, 17:58 
Offline

Joined: 25 Jul 2013, 11:41
Posts: 4
We need to hand-stuff and/or rework prototypes, so the pads on all our custom SMT packages have 20 mil pad extensions beyond the recommended pad size. Any chance of providing such footprints ready-made?
Graham.


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 11 Sep 2013, 10:03 
Offline

Joined: 09 Sep 2013, 09:52
Posts: 23
Location: Pennsylvainia
Admin wrote:
DipTrace Team has the question to our users: what series of components do you want to see in standard libraries in future?
Please specify electronic type or manufacturer you need. We will consider every proposal and best ones will be added to our to-do library list. All suggestions are welcomed.

With kind regards
DipTrace Team


I'd like components with bigger pads and drills to accommodate hand soldering.
Also, using same drill sizes when you can throughout the library.


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 22 Sep 2013, 10:46 
Offline

Joined: 22 Sep 2013, 10:39
Posts: 1
Rf Modules


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 30 Sep 2013, 22:26 
Offline

Joined: 21 May 2013, 08:47
Posts: 1
Hi,

Connectors: USB, micro-USB, SD cards, Compact Flash (CF) cards (several manufacturers)

Memory : commonly used SRAM (44-TSSOP II), SDRAM (54-TSSOP II), and LPDDR (60VFBGA, 90 VFBGA) from ISSI, Micron, Alliance, IDT, Cypress, Winbond ...

FPGA/CPLD: Altera Cyclone IV and V (F484 and U484), Lattice MachXO2 (100 LQFP, 144 LQFP) and Lattice XP2 (144 LQFP and 132-CSPBGA)

Thanks


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 22 Oct 2013, 17:42 
Offline

Joined: 21 Oct 2013, 14:37
Posts: 2
Some components from Cirrus Logic (like the CS8414, CS8416, CS4334 and CS4354) would be a plus, since most EDA's don't include them (except for Eagle that has a tiny library). Also, displays from Kingbright would be great.


Top
 Profile  
 
 Post subject: Re: DipTrace Team has the question to our users
PostPosted: 24 Dec 2013, 03:15 
Offline

Joined: 15 Jun 2010, 11:47
Posts: 21
Different type ans size single pads (square, rectanhgle, cicrle etc) and pin in schematic


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 90 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7 ... 9  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group