i am having a strange problem with the new via style feature in diptrace3d
It seems that there will always be one via named "Default" which is fine. And i have no issues with that. But i always prefer to have my own Via names... anyways.
I created 3 new via style names :
a. SmallVIA. ID=0.3, OD=0.7
b. RegVIA. ID=0.5, OD=1
c. BigVIA ID=1, OD=2
Now, my via styles menu shows 4 types of via.
However, during layout process, i sometimes change my schematic and then i have to renew the design from schematic again, mostly by pressing, CTRL+ALT+U
but once i do that i find wierd stuff. Every time i renew my design, one new via style is created. Now sometimes i have noted that it is by the name "default" and sometimes it is by the name "Viastyles" or Viastyle or so on.
And each time it happens, vias associated with one of the types that i had created are reassigned to this newly created via type. And what is worse is that this new via type has the exact same dimensions as the default via type. Always!!!
Now this is extremely irritating, since now i have to verify and reassign all the vias once again. Because many times this causes DRC errors since bigger vias come in place of smaller vias.
Is there any known fix to this problem.
I have added the two screenshots before and after pressing CTRL+ALT+U
I have also added my schematic and PCB layout. It is still not complete but you will notice that compared to the layout, i have added another resistor R12 in the schematic. Now if i renew the design from the schematic, the via styles are changed.
Need help fast!
You do not have the required permissions to view the files attached to this post.