I am using V3.1, and find that differential pair routing can be a pain if you have multiple components that attach to each pair half, like ethernet for example, where it needs 49.9 ohm resistors on each pair half. Is there a recommended way to deal with this? The way it is currently, the program acts nuts when I try to route from one trace to one pad.
Does 3.1.0.1 do anything with this?
I can't find any place where 3.1.0.1 can be downloaded, although I received a message that it was ready. I also can't find any version notes.
I suppose to fix this properly, components would have to be able to be marked as either primary and secondary endpoints, so that the router knows how to do.
Differential parts 3.1 +
Re: Differential parts 3.1 +
Proceed tofriesen wrote:I can't find any place where 3.1.0.1 can be downloaded
Download>>Downloads Diptrace
at the main page.
You will find a box with the various types of Downloads of "Diptrace 3.1"
But below the box you will read:
"Latest build: 3.1.0.1 (June 27, 2017). Supported OS: Windows XP / Vista / 7 / 8 / 8.1 / 10; Linux (Wine); Mac OS X (XQuartz X11 required). "
A.