Author Message
 Post subject: NC drill file missmatch /
PostPosted: 26 Feb 2014, 22:53 
Offline

Joined: 20 Nov 2013, 07:24
Posts: 15
After generating the NC Drill File , the Manufacturer told me that the file is not matching and asked me to over lap the NC drill file with the TOP layer and check it out.
I need help
a. how to import the top layer as well as the NC drill file at the same time?
While generating the NC Drill file We previewed it, it was fine. An image is attached below.But then after We generated it, We imported only the NC file and it looks in all messed up shape. An image is attached below.
c. how Do we import the NC file like we Preview It?

Attachment:
Import.jpg
Attachment:
Preview.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: NC drill file missmatch /
PostPosted: 27 Feb 2014, 10:14 
Offline
Technical Support

Joined: 14 Jun 2010, 06:43
Posts: 2760
Import Gerber and NC drill files in third-party Gerber viewer. It will help you to preview Gerbers and drill files at the same time and find the problem manufacturer told.
Using DipTrace as Gerber and drill viewer isn't the best idea because there was an error in NC drill import if metric units were used in drill file. We fixed this problem in the beta version but you can suffer the problem in version 2.3.
Also you can send the board file, Gerber and NC drill file to support at diptrace dot com and I will let you know what is wrong.


Top
 Profile  
 
 Post subject: Re: NC drill file missmatch /
PostPosted: 03 Jan 2015, 09:48 
Offline

Joined: 03 Jan 2015, 09:38
Posts: 1
change the nc outputin diptrace from metric to inch or vice versa.


Top
 Profile  
 
 Post subject: Re: NC drill file missmatch /
PostPosted: 03 Feb 2016, 05:21 
Offline

Joined: 02 Feb 2016, 06:23
Posts: 2
to import the top layer as well as the NC drill file at the same time -
Use Import:
'New' for 1st layer
'Add' for 2nd layer
Both layers will then appear on PCB Layout


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group